DB&S Lumber

I had the kitchen cabinetry designed & manufactured. Not sure if the designer only wanted to push sales of the cabinetry for more commission. She designed the drawers to sit on the counter. I did not catch that because it's my first house. When the carpenter finished installing, he told me the problem that the drawers should not be prepare to open often unless you don't put anything in front of it. OR every time you open it, you need to clear the way, what a pain!!! I lost 21" of counter space in front of the drawers. And because the drawer is sitting at the corner and the drawer's hardware is located at the bottom, ok for installing, but the left side was blocked by the wall and impossible to reach hardware to remove. Besides this, when the designer take the measurement, she forgot to reduce the thickness of the sheetrock. The carpenter found out there was not enough space to install as designed & manufactured. He had to shift the sink to the left to steal the space from the dish washer. The kitchen sink is not at the center of the windows as planned. I spent $20,000 for such a design and need to pay more for the carpenter to remove the whole set of cabinet so that he can cut the drawers away. After that, I need to pay the fabricator to redo the back splash. Not recommending to anyone at all.

Great Customer Service and knowledgeable staff. I would highly recommend this Co. and will use them again in the future