Dado Controls

Specializing in elegant residential interior access control solutions, home automation products, motion sensors, hand wave sensors, LCD Touch Panels The Dado Motion Sensor is an advanced automatic/motorized door control using a thermal array sensor that can monitor an area to watch for motion. The area for one ceiling mount sensor to watch is divided into 4x4=16 zones. Each zone is approximately 20" x 20" depending on the height of the sensor from the floor. One or more zones can be programmed as triggers for motion detection to allow for very specific and precise control, while ignoring motion in other zones. An alternative mode of detection can determine the direction of the person traveling, and can trigger the door only under specific directional traffic. The Motion Sensor LCD Programming Display can mount on a wall in any area that is convenient to access for programming. The actual sensors are very small and mount on the ceiling over the area to scan for motion. The system can be sold as a single or dual sensor system, and one LCD Programmer screen can control two main ceiling sensors, one on each side of the automated door. In addition to the two main ceiling sensors, a third Safety Sensor (using a 1x8 grid) can mount above the door aimed directly at the floor to determine if the door is obstructed.